HDPE Male Elbow is an important pipe connector that plays an irreplaceable role in industrial piping systems. It is made of advanced high-density polyethylene material, has a variety of outstanding properties, and is widely used in various fields.
Technical Characteristics
Zhejiang Fengfeng pipe industry HDPE Male Thread Elbow-butt fusion type is a type of fitting made from High-Density Polyethylene (HDPE), used to create a 90-degree angle in a pipeline, while also having a male threaded connection at one or both ends. It allows for the connection of HDPE pipes to other threaded components, such as valves, flanges, or other fittings that require a male thread.
Features of HDPE Male Thread Elbow:
Material: Made of High-Density Polyethylene (HDPE), which is durable, resistant to corrosion, and suitable for handling both high and low temperatures.
Male Thread: One end of the elbow fitting features an external male thread that can be screwed into a female-threaded fitting, such as a valve or another pipe fitting.
90-Degree Elbow: The fitting is designed to make a sharp 90-degree turn in the pipeline, redirecting the flow of fluids or gases at a right angle.
Corrosion-Resistant: Since HDPE is resistant to a wide range of chemicals and environmental factors, it is often used in outdoor or underground applications, as well as in chemical and water systems.
Leak-Free Connections: When properly installed, it provides a tight seal, preventing leaks at the threaded joint.
Applications:
Water and wastewater systems: For connecting HDPE pipes in domestic, municipal, or industrial water distribution networks.
Irrigation systems: Used for redirecting water flow in agricultural and irrigation piping systems.
Gas and fluid transport: Connecting HDPE pipes to gas lines or other fluid systems that require a 90-degree turn.
Installation:
The male thread end of the elbow is typically screwed into a compatible female-threaded fitting, while the HDPE pipe can be welded or fusion-bonded to the other end of the elbow, depending on the specific design of the fitting.
It's important to use thread sealant or Teflon tape when connecting the male thread to ensure a leak-proof seal.
Specifications
SPECIMICATION |
20x1/2M |
25x1/2M |
25x3/4M |
32x1/2M |
32x3/4M |
32x1M |
Before installing HDPE (high-density polyethylene) butt fusion fittings, a comprehensive and in-depth assessment of the construction environment is necessary. This process includes a detailed investig...
READ MOREIn the application of high-density polyethylene (HDPE) materials and their pipe fittings, temperature changes are one of the key factors affecting their performance. Under high temperature conditions,...
READ MOREIn the hot-melt butt technology, the forming problem of the welding interface is a key link that needs urgent attention. This problem is usually manifested as the geometry of the welding interface not...
READ MOREKEEP IN TOUCH